Advertisement
On-Screen
DispJay
Menu
You
can
run
EZ Setup
again,
even
after
setting
up
tile
preset
channels.
Language:
Select
from
among
3 languages
(English,
French
and Spanish).
TV Location:
Select
"Home"
or "Store"
for the
location
where
you
plan
to install
the TV. This
product
qualifies
for ENERGY
STAR
in Home
mode
defauR setting.
Home:
"Power
Saving"
is set to "Off", and AV MODE is set to
"STANDARD".
Store:
"Power
Saving" is set to "Oft" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature
Demo can
be set.
Picture
Reset:
AV MODE will be set to "DYNAMIC
(Eixed)"
regardless
of whether
Picture Reset is "On" or "Off". If
you select
"On", AV MODE will be reset to "DYNAMIC
(Fixed)" if there is no operation
for 30 minutes. When "Oft"
is selected,
AV MODE will be set to "DYNAMIC
(Fixed)".
Feature
Demo:
When "On" is selected, after all the settings
are completed,
the Feature
Denlo screen is displayed
if
there is no operation
for several minutes.
= ENERGY STAR qualification
is based on AV MODE
"STANDARD".
Air/Cable:
Make
sure
what
kind
of connection
is made
with
your
TV when
selecting
"Air"
or "Cable".
OH Search:
Channel
auto
search
makes
the TV look for
all channels
viewabb
in the
set area.
o See initial installation on page 12 for setting each item.
o if no channel is found, confirm the type of connection made
with your TV and try "EZ Setup" again.
If Initial Installation
does not memorize
all the channels
in your region,
follow the instructions
below to manually
memorize
the channels.
Air/Cable:
Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
OFt Search: Channel auto search makes the TV look for
all channels viewabb in the set area.
OFt Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
On: Skips channels. (Channelselectiondisabledusing CH
A/V.)
Off: Does not skip channels. (Channelselectionenabled using
CHA/V.)
Antenna Setup Digital: In order to receive digital air
broadcasts, you need a digital broadcast antenna.
You can confirm the antenna configuration through the
"Antenna Setup Digital" screen. If necessary, adjust the
direction of the antenna to obtain the maximum signal
strength.
Signal Strength: The signalstrength of DIGITALchannelis
displayed.The signalinformationis based on the current
channel.
Channel Strength: Input the 2 digit channelnumberto check
the signal strength of the selectedchannel Make sure the
signal is strong enoughfor each channel.
* This function isavailablefor DIGITAL (Air)only.
o See Initial installation on page 12 for setting each item.
o if no channel is found, confirm the type of connection made
with your TV and try channel search again.
This setting
allows you to skip the HDMI or PC-IN Input
("INPUT4
(PC)", "INPUT5
(HDMI)", "INPUT6
(HDMI)"
and "INPUT7
(HDMI)") on the Input Selection
operation.
Yes: Skips the input.
No: Does not skip input.
Lets you set the input temlinal
displayed
when using
the INPUT SOURCE
menu or channel
display. Press
A/V/-_/I_
to select the new name for the input
mode.
o You cannot change labeb if the INPUT SOURCE is TV.
For adjusting
a picture's
horizontal
and vertical
position.
H-Poe.: Centers the image by moving it to the btt or
right.
V-Pos.: Centers the image by moving it up or down.
o For resetting adjustments to the factory preset values, press
A/T
to select "Reset", and then press ENTER.
o When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
o Adjustments are stored separately according to input
source.
o When a DTV channel is selected, the horizontal position
cannot be adjusted.
o The horizontal and/or vertical position may not be able to
be adjusted or it may be adjusted only to a certain degree.
Some input signals may have to be registered
manually
to display
properly.
The pair of input signals (resolutions)
in the list below is not distinguishable
when received.
ha such a case, you have to set the correct
signal
manually.
After setting
once, it will display when the
same signal (resolution)
is input again.
If024x 768
f360x 768J
o You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
2O
Advertisement
