Download Print this page

Samsung DV484ETHAWR/A1-0001 User Manual page 15

Gas and electric dryer

Advertisement

Available languages

Available languages

ELECTRICAL
REQUIREMENTS
[_
Wiring
is located
the
below the control
frame back.
diagram
on
plate
panel
or
Z_*
Improper
connection
of the equipment
grounding
conductor
can result in a risk of electric shock.
.......
Check with a qualified electrician
or serviceman
if you are in doubt as to whether
your dryer is
properly
grounded.
Do not modify the plug provided
with your dryer - if it doesn't
fit the outlet,
have a proper outlet installed by a qualified electrician.
*
To prevent unnecessary
risk of fire, electrical
shock, or personal
injury, all wiring and grounding
must be done in accordance
with local codes,
or in the absence
of local codes,
with the National
Electrical Code, ANSI/NFPA
No. 70-Latest
Revision (for the U.S.) or the Canadian
Electrical
Code
CSA C22.1 - Latest Revisions and local codes and ordinances.
It is your responsibility
to provide
adequate
electrical
services for your dryer.
*
All gas installations
must be done in accordance
with the national Fuel Code ANSI/Z2231
- Latest
Revision (for the U.S.) or CAN/CGA
- B149 Installation
Codes - Latest Revision (for Canada) and
local codes and ordinances.
GROUNDING
This dryer must be grounded.
In the event of malfunction
or breakdown,
the ground
will reduce the risk of
electrical
shock by providing
a path of least resistance
for the electrical
current.
Z_ Gas models
WARNING
Your dryer has a cord with an equipment-grounding
conductor
and a grounding
plug.
The plug must be plugged
into an appropriate
outlet that is properly
installed and grounded
in
accordance
with all local codes and ordinances.
Do not modify the plug provided
with your dryer - if it doesn't fit the outlet,
have a proper outlet
installed by a qualified
electrician.
Never connect
the ground wire to plastic plumbing
lines, gas lines, or hot water pipes.
WARNING
Electric models
Your dryer has a cord with an equipment-grounding
conductor
and a grounding
plug, sold
separately.
The plug must be plugged
into an appropriate
outlet that is properly
installed and grounded
in
accordance
with all local codes and ordinances.
Do not modify the plug provided
with your dryer - if it doesn't fit the outlet,
have a proper outlet
installed by a qualified
electrician.
If a power
cord is not used and the electric dryer is to be permanently
wired, the dryer must
be connected
to a permanently
grounded
metal wiring system,
or an equipment
grounding
conductor
must be run with the circuit conductors
and connected
to the equipment
grounding
terminal.
DVDV47d
484 03022E-01
EN 20120710.indd
Sec3:15
installing
your dryer 15
2012-07-10
_m 5:27:23
I

Advertisement

loading

This manual is also suitable for:

Dv484gthasu/a1-0001Dv476 seriesDv484 series