Faber Velvet 630006508 Features & Dimensions

Faber rangehood brochure

Advertisement

Velvet
sleek undercabinet glass slide out hood
glass & stainless slideout rangehood
°
slim styling
°
microswitch turns motor/lights
°
on when pulled out
closes flush with cabinets
°
easily replaces existing hoods
°
600 cfm PRO motor
°
2 halogen lights + dimmer light
°
4 speed electronic controls
°
intensive boost mode
°
perimetric suction system
°
silent kit sound reduction
°
dishwasher safe grease filters
°
top or direct rear venting
°
convertible to recirculating
°
grease filter alarm
°
built-in mounting system
°
sone range: 3.5 - 6.5
°
°
6" round duct
Size/Color/Model #
30 Glass & Stainless
36 Glass & Stainless
a
Charcoal Filters
c
For recirculating installations, high
c
quality, heavy duty filters ensure
e
the removal of smoke and odors
from the kitchen. Some ductwork is
s
required to exhaust the unit out of
s
the cabinet.
o
r
i
e
s
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.com
For a streamlined look in the kitchen, the Glass and Stainless
Steel Velvet is your high end integrated solution. The Velvet
has a sleek glass pull-out visor which slides in, flush with your
cabinets, neatly tucking the hood away. The rangehood turns
on and off automatically when the visor is pulled in and out.
VELV30SS
VELV36SS
FILTER1
Integrated Collection
LED Electronic touch controls
CFM Reducer Kit
For use in make up air environments where
an under 300 cfm hood is required. This
kit reduces the ducting to 5" round and
reduces the cfm to under 300
CFMRED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Velvet 630006508 and is the answer not in the manual?

Questions and answers

Summary of Contents for Faber Velvet 630006508

  • Page 1 Velvet sleek undercabinet glass slide out hood glass & stainless slideout rangehood ° slim styling ° microswitch turns motor/lights ° on when pulled out closes flush with cabinets ° easily replaces existing hoods ° 600 cfm PRO motor ° 2 halogen lights + dimmer light °...
  • Page 2 Dimensional Diagrams Front View Pre-Planning Your Installation this rangehood. The recommended height to install this hood off the cooktop is a minimum of 24” and a maximum of 30” for maximum effectiveness. Also consult the cooktop manufacturer’s recommendation. Pre-Planning Your Ductwork Make your ductrun as straight and short as possible.

This manual is also suitable for:

VelvetVelv30ssVelv36ss

Table of Contents