Samsung SIR-T351 Owner's Instructions Manual page 14

Digital Ready TV or Normal TV
Connect an antenna cable to the RFinput
jacks an the SetTopBox.
Conned the Video Cables.
• Digital Ready TV: Connect a video
cable between the DTV OUT COMPO-
NENT (YP_PR) jacks on the Set-Top Box and
the DTVINPUT jacks on the TV.
• Normal 1'!/: Connect a video cable
between the VIDEO OUT jack on the Set-
Top Box and the VIDEO INPUT ack on the
TV.Or, connect an S-Videocabe between
the S-VIDEOOUTPUTjack on the Set-Top
Box and the S-VIDEOINPUTjack on the
TV.
1Vl_r PamJ
<Digital ReadyTV>
Conned the Audio Cables
• Digital Ready TV: Connect an audio
cable between the DOLBYDIGITAL OUT
(optical or coaxial) jack on the Set-TopBox
and the Dolby Digital In jack on the TV.
Or, connect an audio cable between the
Lt/Rt AUDIO OUT jacks on the Set-Top Box
and the L/R AUDIO IN jacks on the TV.
• Normal TV: Connect an audio cable
between the L/R AUDIO OUT jacks on the
Set-TopBoxand the L/R AUDIO IN jacks
on the TV.
iv I_arffr_
< Normal TV>
NOTES
• The TV set must be "digital compatible" (i.e., it must have appropriate audio and digital video
terminals).
• If I080h 720p, or 480p (DIGITAL) is selected with the RESOLUTION SELECT switch on the Set-Top
Box, the On-Screen Display menus will not be supported for VIDEO OUT and S-VIDEO OUT The
OSD menus for VIDEO OUT and S-VIDEO OUT are supported only when 480i (ANALOG) is
selected.
• You must set "DTV OUT SELECT(YP_P_/RGB, DVI)" for YP_P_ i nterface.
14