Samsung DVD-P241 Manual page 24

Setting Up the Parental Control
With the in mode, the MENU
player Stop
press
button.
Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
The player is locked ( _ ).
Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Enter your password.
The Parental Setup screen appears.
Select Rating Level using UP/DOWN buttons, and
press ENTER or RIGHT button.
Select Rating Level you want using UP/DOWN
buttons. For example, if you select up to Level 6,
discs that contain Level 7, 8 will not play.
- To cancel the Rating Level, select No using RIGHT or ENTER
in Use Password.
About the Change Password;
- Highlight Change Password using UP/DOWN buttons.
- Press ENTER button.
The CHANGE PASSWORD screen appears.
- Enter your new password. Enter the new password again.
e.g) Setting up in LEVEL6.
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• if you have forgotten your password, see Forgot Password in the Troubleshooting Guide.
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem Action Page
No operations can be • Check the batteries in the remote. They may need replacing.
performed with remote. • Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several P5
minutes to drain the microprocessor inside the remote to reset it.
ReinstaJlbatteries and try to operate the remote again.
Disc does not play. • Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD. P9
5.1 channel sound is not • 5.1 channel sound is reproduced only when the following
being reproduced, conditions are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.t channel sound.
• Check whether the disc being played has the "Dolby 5.1 ch" mark P14
on the outside.
• Check if your audio system is connected and working properly. P42
• In a SETUP Menu, is the Audio Output set to Bitstream?
The _) icon appears on • The features or action cannot be completed at this time because:
screen. 1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g., angles). P17
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that
is oat ofrange.
Disc Menu doesn'[ appear. • Check if the disc has a Menu.
Play mode differs from lhe • Some of the functions selected in the Setup Menu may not work
Setup Menu selection, properly if the disc is not encoded with the corresponding function. P39~45
The screen ratio cannot
be changed. • The Screen Ratio is fixed on your DVDs. P44
No audio. • Make sure you have selected the correct Digital Output in the
Audio Options Menu. P42
The screen is blocked • Press power on from a cold start with no disc in the unit. Press the
STOP ( • ) and PLAY ( P.II ) buttons simultaneously on the front
panel for three seconds. The SELECT MENU LANGUAGE display P44
witl appear. Select the number button of the desired language.
Forgot password • Press power on from a cold start with no disc in the unit. Press the
STOP ( • ) and PLAY ( _-II ) buttons simultaneously on the front
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language. P45
Press the MENU button, and then press DOWN button to select
the Parental Setup. The Parental Setup is now unlocked as
indicated on the display. You can change your password.
See page 45.
If you experience other • Go to the contents and find the section of the instruction book that
problems, contains the explanations regarding the current problem, and foilow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
46 47