Repeat Play; Program Play & Random Play - Samsung DVD-P241 Manual

Repeat Play Program Play & Random Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
Y
\
When playing a DVD t
Press the REPEAT button on the remote.
Repeat screen appears.
Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
• Chapter ( _ ) : repeats the chapter that is playing.
• Title (m-_) : repeats the title that is playing.
• A-B : repeats a segment of the disc that you select.
Press ENTER.
To return to normal play, press REPEAT again,
then press the LEFT/RIGHT buttons to select Off
and press ENTER.
* REPEAT A-B button
• Press the REPEAT A-B button to select the point where the
function starts. (A)
• Press the REPEAT A-B button to select the point where the
function ends. (B)
•To terminate the function, press the 'CLEAR' button or the
'REPEAT A-B' button again.
•A-B REPEAT does not allow you to set point (B) until at least
5 seconds has elapsed after point (A) has been set.
DVD
CD
NOTE
• DVD repeats play by chapter or title, CD repeats play by disc or track.
• Depending on the disc, the Repeat function may not work.
22
Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
3
Use the LEFT/RIGHT/UP/DOWN buttons to
select the first track to add to the program.
Press the ENTER button. The selection
numbers appear in the Program Order box.
Press the PLAY/PAUSE ( 1_11 ) button.
The disc will be played in programmed order.
Use the LEFT/RIGHT buttons to select RANDOM.
Press the ENTER button.
• Depending on the disc, the Program and Random Play functions may not work.
• PROGRAM/RANDOM playback cannot be used if the disc contains more than two types of file extensions.
• This unit can support a maximum of 20 programmed tracks.
• While in playback mode, press the CLEAR button on the remote control to cancel Programmed Play or
Random Play.
23