Exposurecompensation - Samsung S85 User Manual

White balance
m Using the Custom White Balance
White balance settings may vary slightly depending on the shooting
environment. You can sa]ect the most appropriate white balance setting
for a given shooting environment by setting up the custom white
balance.
1. Select the CUSTOM ( _m_ ) menu of the
White Balance and place a sheet of white
paper in front of the camera so that the
LOD monitor shows only white.
2. MENU/OK button : selects previous cus-
tom white balance. *_
Shutter button : saves new custom White paper
white balance.
- The custom white balance value will be applied, starting with the next
picture you take.
- The user configured white balance will be remain effective until it is
ovewvritten.
Exposure compensation
This camera automatically adjusts the exposure acearding to the ambient
lighting conditions.
You can also select the exposure value by using the Fn button.
mCompensatingExposure
1. Pressthe Fn button,and then use the UP
and DOWNbuttons to select the exposure
compensationicon (_ ).
The exposurecompensationmenubar will
appear asshown.
2. Usethe LEFTand RIGHTbuttons to set the
desired exposurecompensation factor.
3. Pressthe Fn button again.The valueyou setwill be savedand the
ExposureCompensationsetup mode willclose. If you changethe
exposurevalue,the exposureindicator( +_ ) will be displayedon the
bottomof the LODmonitor.
A negative exposure compensation value reduces the exposure. Note
that a positive exposure compensation value increases the exposure
and the LCD monitor will appear white or you may not get good
pictures.
RECORDING (43}