Metering; Drivemode - Samsung S85 User Manual

Metering
If you cannot obtain suitable exposure conditions, you can change the
metering method to take brighter pictures.
[Multi]
]Spot]
]Center]
: Exposure will be calculated based
on an average of the available light
in the image area. However, the
calculation will be biased towards
the centre of the image area. This is
suitable for general use.
: Only the rectangular area in the
centre of the LCD monitor will be metered for light. This is
suitable when the subject in the centre is exposed correctly,
regardless of the back lighting.
: Exposure will be calculated based on an average of the avail-
able light in the image area. However, the calculation will be
biased towards the centre of the image area. This is suitable
for taking a picture of small object like a flower or insects.
If the subject is not the centre of the focus area, do not use the spot
metering as this may result in an exposure error. In this circumstance,
it is better to use exposure compensation.
Drive mode
You can select continuous shot, and AEB (Auto Exposure
Bracketing).
[Single,]
[Continuous]
[MotionCapture]
: Take one picture only.
: Images will be taken con-
tinuously until the shutter
button is released.
: This takes 7 shots per
second, when the shutter is
pressed and held down. After completing the continuous
shooting, images are saved and the images play back on
the Rear LCD. The maximum number of shots is 30 and
the image srze is fixed as VGA.
: Take three pictures in a series in different exposures:
short exposure (-1/3EV), standard exposure (0.0EV),
and over exposure (+I/3EV).
:q_l_o images are taken at a time. Ore is taken inthe RIl-ln
Flashmode ar_ the o_r is taken inthe ASR n_de.
{40} RECORDING