Canon 14EX - MR - Ring-type Flash Instruction Manual page 35

Set the MR-14EX or MT-24EX as
1
the master unit.
Press the <D> button to select
<a>.
Press the <f> button to select
<yk>.
<w> will be displayed.
Press the <e> button to select a
channel 1 to 4.
Set the slave unit.
2
Set the same channel as with the
master unit.
Set the ID to <
As for the setting procedure, refer to
the slave Speedlite's instruction
manual.
Position the slave unit(s).
3
Face the slave unit C's sensor toward
the master unit.
Do not put any obstructions between
the master unit and slave unit(s) C.
Check that the flash is ready.
4
When the slave unit(s) C is ready to
fire, the AF-assist beam will blink for 1
sec.
C
>.
33