Attaching The Control Unit - Canon 14EX - MR - Ring-type Flash Instruction Manual

Attaching the Control Unit

Loosen the locking ring.
1
Turn the locking ring as shown by the
arrow to loosen it.
Attach the control unit.
2
Slip the control unit's mounting foot
into the camera's hot shoe all the
way.
Tighten the locking ring.
3
Turn the locking ring as shown by the
arrow. The locking pin will then
protrude from the mounting foot.
To detach the control unit, loosen the
locking ring until the locking pin
retracts, then detach the control unit.
11