Attaching to the Camera
1. Turn the main switch off.
2. After loosening the tightening nut of the
attachment leg, insert the attachment leg
all the way into the camera's accessory
shoe. If it is not pushed completely in,
correct electrical contact may not be
made.
3. Retighten the nut to lock the flash on.
*
When attaching this flash to a camera that
does not have a directly coupled contact,
connect
the
optional
Synchronization
Cord A first to the 155A's synchro cord
socket and then to the camera's PC socket.
*
When not shooting with flash, make sure
the 155A's main switch is at OFF.