Samsung series 8+ 8000 User Manual page 61

i i iiiii@_'_@i:iiii_iiiii!iiiiiiHlliiiiiiiii!!!iiiii!l ¸i _iii!Ifiiiilliiiiiii _i_iiiiiii!ii!ii!i!iilliHlliiiiiHiiiiiii!_iii!_ii _iiiiiii_iii _ii_iiiiH!iiii!iHili!iiii
The TV is making a humming noise. • Plasma TVs typically make a soft humming sound. This is normal. It's caused by the electricalcharges
that are used to create the images on the screen.
• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the
brightness lower.
• You can also have loud humming if the back of your PlasmaTV is too close to a wall or other hard
surface. Also try rerouting your connection cables.
• Improper installation of wall mount can create excessive noise.
Image Retention (Burn In) Issue. • To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology.
Pixel Shift technology enables you to set picture movement up/down (VerticalLine) and side to side
(Horizontal Dot).
The cable/set top box remote control • Program the Cable/Sat remote control to operate the T_ Referto the Cable/Set user manual for the
doesn't turn the TV on or off, or adjust the SAMSUNG TV code.
volume.
A "Mode Not Supported" message • Check the supported resolution of the T_, and adjust the external device's output resolution
appears, accordingly. Refer to the resolution settings on page 12 of this manual.
Caption on W menu is greyed out. • Caption can not be selected in the TV menu when connected via HDMI or Component (p. 26).
• Caption must be activated on the external device (p. 26).
There is a plastic smell from the T_ • This smell is normal and will dissipate over time.
The TV Signal Information is unavailable • This function is only available with digital channels from an Antenna / RF/Coax connection. (p. 28)
in the Self Diagnostic Test menu.
The TV is tilted to the side. • Remove the base stand from the TV and reassemble it.
The channel menu is greyed out • The Channel menu is only availablewhen the TV source is selected.
(unavailable).
Your settings are lost after 30 minutes or • If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
every time the TV is turned off. the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the
SOURCE button to select "IV mode, and go to MENU -_ Setup _ Plug & Play _ ENTER _ (p. 8).
You have intermittent loss of audio or _ Check the cable connections and reconnect them.
vkJeo. • Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90
degree connectors.
You see small particles when you look • This is part of the product's design and is not a defect.
closely at the edge of the frame of the T_
The PiP menu is not available. • PiP functionality is only availablewhen you are using a HDMI, PC or components source.
POP OV's internal banner ad)appears on • Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature. (p. 8)
the screen.
Some of above pictures and functions are available at specific models only.
English 61