Table of Contents
Advertisement
"I'V, (2) VCRS, AND
SATELLITE
RECEIVER
(CONNECTION
I)
This information
applies to Connection I in the Connections
Foldout.
ConneXion
I provides:
•
stereo sound from broadcast programs
=
stereo sound from VCR
•
Picture in Picture (PIP)
=
Watch one channel on TV while recording another channel
To use this connection
you must have:
•
(5) coaxial cable
•
(9) audio/video cables
•
(1) S-Video cable (optional)
To connect:
1.
Connect cables as shown in Connection I.
2.
Return to First Things First, then follow the steps in the
Interactive Setup.
USING
CONNECTION
I
To watch
TV programs:
1.
Turn VCR and satellite receiver and laserdisc player off.
2.
Press TV and tune to a channel.
To watch
Satellite
programming:
1.
PressSAT-CABLE and tune to a channel.
To record from one VCR to _he other
(tape dubbing):
s J
1.
Turn satellite receiver off.
.
3.
4.
5.
6.
7.
.
Insert original tape into VCR2.
Insert blank tape into VCR1.
Press VCR 1.
Set VCR to line input (for more, see your VCR User Manual).
Press RECORD to begin recording.
PressDVD-VCR2, then press PLAY.
If you want to watch a different channel, set the TV/VCR
switch on both VCRs to TV; press TV; then tune to a channel.
66
CABLE, CABLE BOX, OR ANTENNA
SATELLITE
SATELLITERECEIVER
See Connections Foldouto
Connection I
Advertisement
Table of Contents
