Table of Contents
Advertisement
"IV AND
(2) VCRS (CONNECTION
D)
This information applies to Connection D in the Connections
Foldout.
Connection
D provides:
•
stereo sound from broadcast programs
•
stereo sound from VCR
•
Picture in Picture (PIP)
•
Watch one channel on TV while recording another channel
•
Record from one VCR to the other
To use this connection
you must have:
•
(3) coaxial cable
•
(6) audio/video cables
•
(1) S-Video cable (optional)
To €onnect:
1.
Connect cables as shown in Connection D.
2.
Return to First Things First, then follow the steps in the
Interactive Setup.
USING
CONNECTION
D
To watch lr!/programs:
1. Turn VCR off.
2.
PressTV and tune to a channel.
To record one program
and watch
anothen
1.
Turn VCR2 off.
2.
Press VCR1 and tune to a channel.
3.
Begin recording.
4.
Make sure the TVNCR switch on the VCR1 is set to TV.
5.
PressTV and tune to a channel.
To play a tape on the VCR:
1.
Press VCR1.
2.
Press PLAY.
You can record from one tape
to another (tape dubbing):
1. Insert original tape into VCR2.
2. Insert blank tape into VCR1.
3. Press VCR1.
4. Set VCR to line input (for more, see
your VCR User Manual).
5. Press RECORD to begin recording.
6. Press DVDoVCR2, then press PLAY.
7. If you want to watch a different
channel, set both the TV/VCR
switch on both VCRs to TV; press
TV; then tune to a channel.
Note: The unauthorized
recording of
satellite broadcasts, television
programs or other copyrighted
material may infringe the rights of
others.
r
CABLE, CABLE BOX, OR ANTENNA
VCR 1
O
See Connections Foldout_
Connection
D
II I'
j
61
Advertisement
Table of Contents
