Table of Contents
Advertisement
2.
Select a device you would
like to control.
Keep track of devices by assigning a label.
.
4.
Complete the on-screen sentence using the arrow buttons
and MENU,SELECT. Press MENU,SELECT to scroll through
the
lists of appliances and locations.
Use the arrow buttons
and MENU-SELECT to select the house
and module codes that match the device's remote module.
Select Save Setup to complete the setup.
Once the device is set up, there are two ways to control
it. Select
a device from the Home Control menu screen. You can turn it on
and off, or schedule a timer that controls the device
automatically.
Schedule a timer by completing
the on-screen sentence.
Complete the on-screensentence to schedulea
timer.
1.
Use the arrows and MENU,SELECT to enter an on and off
time.
2
Point to and select Run Timer.
If you want to change a device, select Edit Setup.
I You can schedule several timers to 1
control the same device at
|
different
times.
.
J
55
Advertisement
Table of Contents
