Table of Contents
Advertisement
CONNECTION
A
BEST PICTURE
AND
SOUND
QUALITY
To use this connection you must have:
•
TV with separate RF,audio/video,
and S-Video inputs (jacks)
•
VCR with RF and audio/video
inputs
•
Coaxial, audio/video,
and S-Video cables
To connect
TV, VCR and antenna
or cabl_
box:
1.
Connect coaxial cables as shown.
2.
Connect audio/video cables as shown.
3.
Connect S-video cable as shown.
IV
REe.EIV_
_R
_IELU_
To receive
DSS ® programming:
1.
Tune TV to receive the S-Video output from the DSS® receiver.
2.
Tune DSS®receiver to desired channel.
To receive
off-air
programming
(no cable box):
1.
Turn off VCR and DSS ® receiver.
2.
Tune TVto desired channel.
To receive
off-air
programming
(with
cable box):
1.
Turn off VCR and DSS® receiver.
2.
Tune TV to cable box output
channel (usually CH2, CH3,
or CH4).
Tune cable box to desired channel.
To record
DSS ® programming:
1.
Tune TV to receiveS-Video
output
from DSS ® receiver.
®
2.
Tune DSS receiverto
desired channel.
3.
Set your VCR to record on line input.
To view
VCR
programming:
1.
Tune TV to VCR output
channel (usually CH3 or CH4).
CAUTION
Do not stack electronic
components
or other objects on
top of the DSS* receiver. See
Safety Information,
inside front
coyer.
10
Advertisement
Table of Contents
