Table of Contents
Advertisement
SENDING
THE
DSS ® SIGNAL
TO MULTIPLE
TVS
The most important feature of the agile modulator is that it
creates a unique DSS ®television channel. This unique channel
can be combined with other TV channels on your antenna or
cable system. Combining the signals and distributing them to all
the televisions in,/our home lets you watch DSS ® programming
or local programming on any television connected to your
system by simply changing channels on the TV.
The simplified drawing at the right shows how cable or off-air
signals and the DSS ® output channel can be combined and
routed through a whole'house distribution system (sold
separately). Although
not shown in detail, a whole-house
distribution system consists of signal splitter/combiners and
amplifiers to boost both the DSS® output channel and off-air or
cable channels.
_s_
_
_ECEMER
\
BB -I%
TVs IN yOUR HOME
SINGLE TV OUTPUT
Although the agile modulator is designed for a whole-house
distribution system, you may still need to set the output channel
even if you are running a signal from the OUT TO TV jack to only
one television. The default setting is channel 14 (off-air) and 65
(cable). Try to get a signal on these channels first; then go to
Output Channel in the Options menu to change the agile
modulator setting.
_R
=_=1
RECEIVER
17
Advertisement
Table of Contents
