RCA ProScan PS35153 Owner's Manual page 31

Setup Menu" Basic Functions continued
VCR Channel Setup
The VCR 1CHAN function lets you program to which channel
the TV will atttomatically tune when you press the VCR1
button on the remote. This is handy it you connect a VCR
to your TV. You will no longer have to remember to which
input jacks the VCR is connected because the TV will
remember for you.
Fol example, if you connect a VCR's AUDIO/VIDEO OUT jacks
to the TV's iNPUT 1jacks (as shown on page 4(I), you will
no longer have 1o remember to select channel 91 on the TV
to .,,ee what the VCR is playing. By entering channel 91
ne._t to the VCR 1CHAN function, the TV will atttomatically
tune to channel 91 each time you press the VCR1 button on
the remote.
This function is especially convenient if you have a
compatible VCR that can be operated bv the VCR1 button on
the remote. Pressing vcm will then not only turn on the
VCR but also atttomatically tune the TV to the proper
channel for viewing the picture from the VCR. You can
program most brands of remote-controllable VCRs to
respond to the VCR1 button as de.scribed on page 28.
The VCR 2 CHAN function works the same way. It lets you
program to which channel the TV will automatically tune
\vh,zn you press the VCR2 button on the remote. You can
program most brands of remote-controllable VCRs to
respond to the VCR2 button as described on page 28.
Pressing the VCR2 button will then not only turn on the
VCR but also automatically tune the TV to the proper
channel for viewing the picture from the VCR.
Setting Up VCR Channels
wilh or without remote
1 P,epeatedly press the
MENU
button to select
SETUP MENU
and
then press + to display the setup functions.
Mute
Video Menu
Audio Menu
IG,'I_RITiI _,[:a ,i,
2 Repeatedly press MENU
tO
select the VCRq CHANfunction.
7:57 PM 13
Autoprogram
Chan Mern: Stored
Antenna: A
Cable/Air" Cable
I"_e_ = JD],_.u_e]i I
I
Enter the channel number you
wanl to program by pressing two
number buttons tin the remote
control. (The channel number
you ,enter is the channel to v, hich
the TV will tune automatically
when you later press the VCR_button on the remote.) See the
note,_ below if you arc unsure ab_,ut which channel number to
entel.
Pres', the + button to program
the channel number you
selected into the TV's memory.
Note: Pressing the - button here
will turn off this feature and
dzspla__ VCR1 CHAN: O FFagain.
If you ha_ e another VCR
connected to tile TV, press
MENU tOselect the VCR 2 CHAN
func:ion.
Enter the channel number you
want to program by pressing
t_ 0 number buttons on the
remote control. (This is the
channel number to which the
TV will tune automatically when you later press LheVCR2
button on the remote) See the m,tes below if you are unsure
about which channel number to eater.
Pres.sthe + bu_ton to program
the channel number you selected
into _.heVCR 2 CHAN function
memory.
Note: Pressingthe - button here
x_ill tarn off this feature and
d_',play
VCR 2 CHAN: OFF
again.
Notes about Entering Channel Number:
• Enter
channel Ol if 3 our ¥CR is connected to the TV's audm and video
INPUT 1jacks
• Enter channel 92 if 3,our _,'CR is connected to the TV's audio and video
iNPUT2 jacks.
• Enter channel 90 _f you have a Super-\'HS VCR that _s connected to
the ]'V s S-VIDEOconnector and INPLITI audio jacks Ilabeled L and
R/MONO).
• Enterc'_annel t )3(or04) ]t you did not Jse any audio/,,ideocablesand
connec]cdthe VCRto the TV's round ,mtennaconnectorlabeled
CABLE/ANTENNA.
Enterthe same chann,qnumber(03 or ,)4) as the
position of the \"CR's CH3/CH4 switch. This is the channel to which
you must tune yourTV fm viewing .,,ignals from yourVCR.
28