Tv Signal Connection; Cable Connections; Side Panel Connections; Composite Video Connection - RCA LED42C45RQ User Manual

I'- " /_Y '/_ IIIIIIIIIIIIIIII
I
Take the base. Please align four holes of the base and four screwholes i
of the neck, insert the base to the neck, and then insert the 4 screws
and tighten them.
I_°°°St_l I_uant_l Pa_
h__M:r:i4mml 4pcs i ........... .
Please take note of the base direction: __
The bottom view of the TV _ <1 o
(Front cabinet faces down) Longer side
The first step in connecting your TV is obtaining the signal. Your TV
LED42045RQ has a back panel, which allows you to receive analog
and/or digital television channels via ANT/CABLE jack.
Before connecting your TV, determine using an antenna or a cable
service to obtain the signal.
A. Antenna
Connect the antenna to TV via coaxial cable on ANT/CABLE jack
of the back panel. You are ready to receive air local digital and
analog channels.
B. Cable TV service
Connect the cable TV wall jack to TV via coaxial cable on
ANT/CABLE jack of the back panel. You are ready to receive
oft-air local digital and analog channels.
C. Set-Top Box
If you use a set-top box, you may need to call your cable company
or satellite service provider, which use a special connection, please
refer to the user's guide of sebtop box.
Note: Do not plug the AC cord until you have accomplished
all the connections.
Cable TV Anterlrla
COMPOSITE
L-AUDIO-R
COMPONENT ¥, Pb, Pr
L-AUDIO-R
HDMI 1/DVl, 2
Video/Audio cable
Audio Cable
COMPONENT video cable
HDMFDVl cable
HDMI cable
See the below
Go to page 5
Go to page 5
Note:
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LL C
Caution:
Unplug the AC cord when you connect other devices to TV.
Connecting AV Composite device
(Good Video Quality)
Composite connector will be shared with Component Y connector.
To connect a composite AV device, such as a DVD player, follow these
steps:
1.Connect the COMPOSITE jack on the side of TV to the video output
jacks of device via video cable (yellow).
2.Connect the L-AUDIO-R jacks on the side of TV to the audio
output jacks of device via audio cable.
Notice the left channel jack and plugs are white and the right
channel jack and plugs are red.
Note: A V signal belorlfjs to composite video. 77//_ kind of vk/eo signal
has r_;_uklr geod c/sspk4squalsfy.
Composite Video Connection
The picture below is an example of a connection using the
composite video jack.
AC Power Cord
(Connect after all the other connections are done.)
Choose Your Connections
TV LED42C45RQ supports various connections to other devices
(such as DVD, VCR, Set-top box, etc.). Please follow the table to
choose the cables which adapt to your device.
4
The back of TV
The output panel of other device