RCA L42FHD2X48 User Manual page 60

Removing Table Stand
Your TV comes with the table stand attached. If you want to mount your TV to the wall, remove the table
stand by following the instructions below:
_,_i_i_i_ii!ii!ii!ii!ii!iiiii_iiiiiii_ii,i_i_!i!i!iiiiii!i_!_il _
Step 2
1. Take the TV bag and place it on a flat table.
2. Take the TV set and place it face down on
the TV bag.
Step 3
Attach the Stand Cap to the TV cabinet.
Remove the Table Stand from the TV cabinet by
taking off the three size M6 St-screws with a
screwdriver. (Note: there are four M5 St-screws
for models L46FHD2X48 & L52FHD2X48)
TV cabinet with Stand Cap attached.
Caution: Your wall
mount must be ab/e to
bear a minimum ot rive
times the TVS net
weight to avoid
causing damage.
Mounting Your TV to the Wall
Models L42FHD2X48
/L46FHD2X48/L52FHD2X48
Purchase a VESA 600 x400, M6 screw
The VESA number is the horizontal and vertical measurement of the mounting holes. For example,
600x400 refers to fact that the mounting measurements are 600mm horizontally and 400mm vertically.
Follow the directions included with the wall mount to mount the TV to the wall.
8 1 i Connections and Setup