RCA L42FHD2X48 User Manual page 121

What To Expect
Watching TV
Analog Channels
An "A" at the bottom of the screen denotes that you are watching an analog channel. Analog video is sent in a
4/3 format. Your TV can display these channels in a 16/9 format by pressing the FORMAT buttons to view
the different formats available. Go to page 33 for more explanation of screen formats.
Digital Channels
A "D" at the bottom of the screen denotes that you are watching a digital channel. Most digital video is sent in a
16/9 format, which fills the screen. However, it is sometimes sent in 4/3 format, which does not fill your
screen. The format is dependent on how the station or source component is configuring the video.
Note:/tthem are bars on-screen, press the FORMAT button to try a difterent t_rmat. This may eliminate the bars.
._ome bars can't be removed because of the way the tc_rmatis sent by the broadcaster. Go to page 33 tc_rmore
explanation of screen tc_rmats.
Changing
Channels
• Digital channels can have both primary channels (like the analog channel number) and sub-channels. To
tune to a digital channel with a sub-channel, such as 10.1, enter the primary channel number (10), then
press the right arrow button. Enter the sub-channel number (1) and press OK.
• Depending upon the type of signals you have connected to your HDTV, you may notice that the channels
change more slowly than usual. This is perfectly normal. Digital channels sometimes take longer to tune.
Connections and Setup ::;
17