RCA L42FHD2X48 User Manual page 120

Complete the Initial Setup
The menu system in your TV allows all of the TV's features to work properly. The first time you turn
on your T_, the language screen appears.
Set the Menu Language
The first step of the setup requires you to select your preferred language for the menu system. If
English is your preferred language, press the OK button or right arrow and proceed to set the TV
Location Mode. To choose another language, press the down arrow until that language is
highlighted, and select it by pressing the OK button or right arrow.
Set the TV Location Mode
After choosing the language, a menu screen asks you to set the TV Location. Choosing "Home" for
the TV Location assigns the optimal picture settings for most home environments. This is also the
most energy-efficient setting. Press OK to display the Channel Setup menu.
Complete Channel Setup
Make sure you've connected the TV to the cable or an off-air signal before you start the next part of
the setup.
Set the Signal Type
From the Channel Setup menu, press the up or down arrow to highlight Signal Type. If you have
connected the cable to your ANTENNA/CABLE INPUT jack, the option is chosen for you. Simply
press the down arrow to continue.
To choose Antenna, press the OK button or right arrow; then press the down arrow to continue.
Complete the Channel Search
With Channe! Search highlighted, press the OK button to begin the channel search. If you chose
Cable as your signal type, the search takes a while because it is looking for both analog and digital
channels. Then, it removes scrambled channels.
The Channel Search process includes the following steps:
1. The search first seeks analog channels and places the number of channels found next to Analog
Channels Found.
2. The search then looks for digital channels and places the number of channels found next to Digital
Channels Found. This number may seem high. This is because the number includes both
scrambled (for example, Pay-Per-View) and non-scrambled channels. These channels are
dependent upon what your cable company is sending.
3. The search might appear as if it is complete, but as long as the search says Running, it is still in
progress. The TV is now removing scrambled channels from the channel list.
4. When Channel Search is in progress, you can press the CANCEL button to cancel the search.
Any channels already found will be stored.
5. When the search is complete, the Channel Setup Menu displays the following help text: "Channel
Search complete. Press OK to review channels. Press CANCEL to exit, MENU for Setup Menu."
If this is the TV's first installation, the help text displays "Channel Search complete. Press OK to
review channels. Press CANCEL to exit."
You may find there are still some channels in your list that are unavailable to view. To delete these
channels, press MENU and choose Setup. Highlight and select List and Labels.
Note: Removing channels tram your channel list m_ly be time-consuming, so you may vv_nt to do it I_:,ter.
Go to page 37 t(_r det_:,ilson editing your channel list.
Note: It you are using a satellite or cable set-top box, you do not need to complete Channel ._earch.
16
1 Connections and Setup