Table of Contents
Advertisement
2O
EnergySaver
By default,
this VCR automatically
turns off after two hours of
inactivity.
Press 4 to change the time delay, or to disable the
feature.
•
OFF: The VCR will remain turned
on until you shut it off.
•
1:00, 2:00, or 3:00: The VCR turns off after one, two, or three
hours of inactivity.
Thirty seconds before shutting
off, the VCR will warn you with a
screen reading,
"The VCR will turn off in 30 seconds. Press any
key to cancel."
If you use the VCR's tuner instead of your TV to tune channels,
you may want to turn this feature off.
Front
Panel (VCR Display)
You can change the brightness
level of the fluorescent
display
panel on the front of the VCR. Press 5 to switch between the
options.
•
AUTO
brightens
the display
when
the VCR is on and dims
the display
when
the VCR is off.
•
BRIGHT keeps the display bright.
•
DIM keeps the display
at a low brightness
level.
Preferred
Tape
Speed
You can set a preferred
tape speed that is established
each time
the VCR is turned on and as the initial setting for timer
programming.
Press 6 to switch between
the two recording
speeds.
•
SP sets the preferred
recording
speed to SP.
•
SLP sets the preferred
recording
speed to SLR
The preferred
setting can be overridden
using the SPEED button
on the remote.
Tape Speeds
SP (Standard Play)
Gives the best quality recording,
but fewer programs can be
recorded on the tape. Special
effects such as pause, slow motion,
picture search, and frame advance
work well when you play back
tapes recorded in this speed.
LP (Long Play)
Your VCR is capable of playing back
tapes recorded in LR You cannot
record in the LP speed.
SLP (Super Long Play)
Gives three times the recording
time of tapes recorded in SR
Special effects such as pause, slow
motion, picture search, and frame
advance work well when you play
back tapes recorded in this speed.
Cassette
T-120
T-160
Recording
Time
SP
SLP
2Hr
6Hr
2Hr
8Hr
40Min
Advertisement
Table of Contents
