Things
to Know Before
Connecting
Components
Protect
Your
Components
from
Power
Surges
•
Connect
all components
before plugging
any power
cords into the wall outlet.
•
Always turn off theTV and other components before
you connect or disconnect any cables.
¥
V
Position
Cables
Correctly
to Avoid
Audio
Hum
or
Interference
Insert all cable plugs firmly into theirjacks.
Place the audio/video
cables to the sides of theTV's back
panel instead of straight down the middle after you
connect your components.
Try not to coil any twin-lead cables and keep them away
from the audio/video cables as much as possible.
Make sure all antennas and cables are properly
grounded. Refer to the SafetyTips sheet packed with
your unit.
V
V
V
Protect
Your
Components
from
Overheating
•
Do not block ventilation
holes
in any of the components.
Arrange the components
so that air can circulate freely.
•
Do not stack components.
•
Allow adequate
ventilation
when
placing
your
components
in a stand.
•
Place an amplifier
or satellite
recei ver on the top shelf of
the stand
so heated
air rising from it will not flow
around
other
components.
7
¥
CONNECTIONS
53