Tv Function Buttons - GE VG4043 User Manual

INPUT Selects between the line input and theVCR's tuner. Line
input refers to the signal coming from the component connected
to the AUDIO/VIDEO IN jacks on the back of the VCR.
MENU Brings upVCR MAIN MENU on theTV screen.
Numbers (O through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 -- appears on the screen.Then press the other
two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
POWER Turns the VCR off.
RECORD StartsVCR recording. Also used for express
recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback. Starts slow motion
during play-pause and decreases slow-motion speed.
SEARCH Displays Index, Zero, and Blank Search menus onTV
screen.
SLOW + and - Used for slow-motion playback. Press + to
increase the speed or - to decrease the speed.
SPEED Selects a recording speed (SP or SLP).
STOP Stops the currentVCR function such as record, playback,
rewind, or fast forward.
TRACKING Up or Down Lets you manually reduce the
streaks that may appear on the picture during play, slow motion,
or pause. Reduces picture "jitter" during stop-action playback.
TV*VCR Switches the picture signal so that it either comes
from the VCR or cable/antenna system.
TV Function Buttons
CHAN Up or Down Selects next higher or lower channel in
theTV's channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels. In menu mode, press
to go back to previous menu.
TV Function Buttons
TheTV buttons may not control all
features of all models of GE, RCA,
and ProScan TVs.
19