GE VG4043 User Manual page 6

STEP l: Unpack What's in the Box
The following items come packed in the box:
• VCR
• Remote control
• RF antenna cable
STEP 2: Install Batteries in the
Remote Control
Follow these steps whenever you need to install or change the
batteries in yourVCR remote.
1. Remove the cover of the battery compartment.
2. Place batteries in remote, matching the + and - ends of each
battery to the diagram inside the compartment.
3. Replace the cover.
STEP 3: Connect Your VCR
If you connect yourVCR to your home antenna or cable system
and then to yourTV, use theVCR's IN FROM ANT. and OUTTOTV
jacks for a good signal as shown.
If you have aTV with AUDIO/VIDEO jacks, use the audio/video
jacks on theTV and VCR for a better connection. Refer to the
Connections section, toward the back of the manual.
STEP 4: Plug in the VCR
Match the wide blade of the plug with the wide slot in the outlet.
Be sure to insert the plug completely.
VCR
CABLE, CABLE BOX, OR_ANTENNA
iii 2 -2 I
TV
J
4