Tv Function Buttons - GE VG4054 User Manual

Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 -- appears on the screen. Then press the other
two numbers.
PAUSE Pauses playback or ecording. Press FAUSE again to
return to playback or recording.
PLAY Plays a tape.
RECORD Starts VCR recording. Also used for Express
recording.
REVERSE Rewinds the tape when the VCR is stopped.
Searches backward through a tape during playback. Starts slow
motion during play-pause and decreases slow-motion speed.
SEARCH DisplayslNDEX and ZERO Search menus on TV
screen when VCR is stopped. Advances the tape 30 seconds of
recorded material during playback. Each press advances the
tape an additional 30 seconds up to five minutes.
SPEED Selects a recording speed (SP or SLP).
STOP Stops the current VCR function such as record, playback,
rewind, or fast forward. Press and hold for three seconds during
the stop mode and the tape will eject.
TRACKING Up or Down Lets you manually reduce the
streaks that may appear on the picture during play, slow motion,
or pause. Reduces picture "jitter" during stop-action playback.
TV,VCR Switches the picture signal so that it either comes
from the VCR or cable/antenna system.
TV Function Buttons
CHAN Up or Down Selects next higher or lower channel in the
TV's channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the TV's status displays on the TV screen.
INPUT Selects between the TV's input channel or tuner. Press to
see the VCR signal if you connected your VCR using the
AUDIONIDEO jacks.
MUTE Reduces volume to minimum level.
r
TV Buttons
The TV buttons may not control all
features of all models of GE, RCA,
or PROSCAN TVs.
If you have trouble getting a picture
on the TV screen, refer to "How to
Find Your TV's Video Input
Channel" on page 55 or the
"Troubleshooting" section starting
on page 56.
23