Advertisement
On-Screen
Displays
The INFO button shows the status ofthe VCR (STOP, PLAY,
RECORD, etc.), channel
number, time counter, date, time
and
tape speed on the TV screen. The date and time must be set
before they can be displayed.
1.
Press INFO to see the on-screen displays.
2.
Press INFO again to have only the time counter remain on
the screen.
3.
Press INFO again to return to the normal
display.
Turning off the VCR also resets the displays.
2
STOP
CH
05
0:30:00
11117197
Mon
01:30PM
SLP
On-screen display (times out
0:30:00
77me counter
only
(does not time out)
3
Tracking
Your VCR has automatic
tracking which removes the streaks or
snow from the picture. Automatic
tracking
is activated
when you
insert a tape or turn on the VCR. Occasionally
you may need to
manually
adjust tracking, especially
if the tape was recorded
on a
different
VCR. Just use the TRACKING buttons to remove the
streaks or snow. You can also use tracking when you PAUSE a
tape to reduce jittering
of the picture.
When you manually
adjust the picture, automatic
tracking
is
turned off. To turn automatic tracking
back on, press both
TRACKING buttons
on the front of the VCR at the same time, or
eject the tape and re-insert it.
Tracking has no effect during recording--only
playback.
Normal dispfa y
39
Advertisement
