Advertisement
Numbers
(0 through
9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 -- appears on the screen. Then press the other
two numbers.
OFF Turns the "IV off.
VOL Up and Down
Raises and lowers sound of TV.
Playing a Tape
1.
Tune the TV to your VCR viewing channel
(3, 4, or TV's video input).
2.
Insert a tape in the VCR.
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is
removed).
•
Press FWD or REV (FORWARD or REVERSE on remote)
to position
the tape.
•
Press PLAY,PAUSE (if necessary) on the VCR (PLAY on
remote) to begin tape play.
•
Press PLAY, PAUSE on VCR (PAUSE on remote) for
stop action.
•
Press TRACKING up or down to remove any streaks from
the picture,
if necessary.
•
Press STOP,EJECT on VCR (STOP on remote) to stop
playback.
Tape Eject
Press STOP.EJECT on the VCR when it is stopped to
eject the tape.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
Automatic
Tracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned on whenever a tape is
inserted or the VCR's power is turned
_on.
20
Advertisement
