Advertisement
About
Programming
the Remote
The remote can be programmed
to control other brands of
remote controllable
TVs. It is already programmed
to operate
most RCA0 ProScan0 and GE TVs.
Programming
the Remote
to Control
a TV
If the TV does not turn on when you press the TV button, the
remote needs to be programmed.
Follow these steps to program the remote to control your
particular TV:
1.
Turn ontheTV.
2.
Find your TV brand and code number(s)
on the code list on
the next page.
3.
Press and hold the TV button on the remote.
4.
Enter the two-digit
code from the code list.
5.
ReleaseTV, then pressCHAN
upordown.
IftheTV
responds to the remote commands,
the remote is
programmed.
6.
If the TV does not respond, repeat these steps using the next
code in the list.
Operate
the TV
After you set up the remote, see which buttons operate your TV.
1.
Point the remote at the TV and press the TV button.
If the TV does not turn on, press the TV button and then press
the OFF button.
2.
You may want to experiment
to see which buttons
operate
your TV. Try pressing buttons, such as VOL and MUTE. See
"TV Function Buttons"
in the VCR Basic Section for details.
This remote
may not operate all
models of the brands that are shown.
Note the difference between theTV
and VCR on-screen displays to see
which one the remote is operating.
32
Advertisement
