Table of Contents
Advertisement
The choices for each screen are:
Not connected
Choose this if you do not have a component
connected
to an antenna or video input on the back of the TV, or if
you don't want the TV to tune to a channel when the particular
component
button
is pressed.
Channel
2 (SATICable
only)
Choose
this if your component
is
connected
to the antennajack
on the back of the TV, and you want
the TV to tune
to channel
2 when
you
press the specified
component
button.
Reminder:
Make
sure the component's
Ch 2/3/4
switch
is set to channel
2.
Channel
3 Choose this if your component
is connected
to the
antennajack
on the back of the TV, and you want the TV to tune to
channel 3 when you press the specified
component
button.
Reminder: Make sure the component's
Ch 3/4 switch is set to
channel 3.
Channel
4 Choose this if your component
is connected
to the
antennajack
on the back of the TV, and you want the TV to tune to
channel 4 when you press the specified
component
button.
Reminder: Make sure the component's
Ch 3/4 switch is set to
channel 4.
Video Input
Choose this if your component
is connected
to the
VIDEO jack on the back of the TV and you want the TV to tune to
VID (SVID if you used an S-Video cable) input channel when you
press the specified
component
button.
Video Input
Source
Lets you select whether
or not you have used the
S-Video jack to connect a component.
If you are using the S-Videojack
in this way, select S-Video Input. If not, select Video Input. This option
is
not available
in models F25625 and F276225.
TIME
MENU
Sleep Timer
Displays a control
panel that lets you select the amount
of time you want to give the TV before it shuts itself off.
Schedule
Displays a control panel that lets you set up a schedule for
turning
the TV on and off automatically.
Make sure to turn the
schedule
on, The on-screen directions
guide you through
the steps
needed to set the schedule.
Set Time
Displays a control
panel that lets you enter the current time.
The on-screen
directions
guide you through
the steps needed to set the
time. If your GUIDE Plus+ system is set up, it will automatically
update
your time and this option
will not appear.
View Warranty
Clock Displays the number of hours the TV has been in
operation
(up to 5 years) and the date the TV was first turned
on.
r
Other
Menus
The rest of the menusiparental
Controls, GUIDE Plus+ menu, and
Setup--are
also detailed in this manual.
Look for the GUIDE Plus+ setup routine
and the Setup menu in the section
Interactive Setup. Descriptions of how
to use Parental Controls and the GUIDE
Plus+ menu are in the section Features
and Controls.
36
Advertisement
Table of Contents
