Table of Contents
Advertisement
Dynamic
Contrast,
Film Mode,
Noise Reduction
Set dynamic contrast as Off/low/Medium/High.
Set film mode on/off. Set noise reduction as Off/low/Medium/High.
MPEG Noise Reduction
Set MEPG noise reduction as Off/low/Medium
or High.
Note: Noise reduction helps to reduce the picture "static" or any type of interference. This feature is especially useful for
providing a clearer picture in weak analog signal conditions. The MEPG Noise Reduction specifically works on video signal
with MPEG coding.
MFC Effect
(Motion
Flow Compensation
Effect)
Set MFC Effect as Off/low/Medium/High.
MFC Effect technology
removes drag from fast scenes with a lot of movement to
provide a smoother
picture. Off switches the MFC Effect off, High provides smoother effect, Low provides smooth effect,
Medium sets MFC Effect to medium.
MFC Demo (Motion
Flow Compensation
Demo)
Set MFC Demo On/Off. It shows the difference between MFC Effect on and off modes on the screen.
The screen shows as picture given below when sets MFC Demo on:
Left side: Set MFC Effect Off
Right side: Set MFC Effect On (Provides smoother
picture movement)
25
Advertisement
Table of Contents
