Setting Up Your Channels - RCA T25208 User Manual

Connections Setup
SYSTEMSET-UP "1
II CLOCKSET
II LANGUAG FJIDIOMNLANG UE
II AUTOCLOCK tON OFF
\Ill/STANDARD TIME
-II DAYLIGHT SAVINGTIME
DAYLIGHT SAVINGTIME
_'ON
OFF
AUTO
(+/-/ENTER/MENU}
Setting Daylight Saving Time
The Daylight Saving Time is set to the AUTO position by default. If you want to
set the time manually you need to set it "ON" on the first Sunday in April, and
set it "OFF'on the last Sunday in October.
]Vote: If your area does not have Daylight Saving Time, you need to set
the position to OFF.
1. Press the MENU on the remote (the MENUappears).
2. Select SYSTEM SET-UP, then press ENTER.
3. Select DAYL1GHTSAVING TIME, then press ENTER.
4. Press the up or down arrow button to either turn ON or OFF Daylight
Saving Time.
5. Press the MENU button until the MENUscreen disappears.
• 1
\/CH SET-UP
- I TV_CATV
"i\AUTO CH MEMORY
I ADD/DELETE
(+/-/ENTER/MENU)
Setting Up Your Channels
The TV/VCR is set to receive TV cable channels. If you want the TV/VCR to
receive UHF/VHF channels, follow the directions below.
1. Press MENU on the remote (the MENU appears).
2. Press the down arrow button to select CHSET-UP, then press ENTER.
3. Press ENTER to select TVmode.
4. Press MENU until the MENUscreen disappears.
CH SET-UP
_,, TV_'CATV
-l AUTOCH MEMORY
In\ADD/DELETE
(+/-/ENTER/MENU)
Complete Auto Channel Memory
The Auto Channel Memory allows the TV/VCR to search for all channels
viewable through your antenna or cable TV system. This is sometimes called
"auto programming."
1. Press MENU on the remote (the MENU appears).
2. Press the down arrow button to select CHSET-UP, then press ENTER.
3. Press the down arrow hutton to select ALTO CHMF_ORY, then press
ENTER. The TV searches for all availahle channels and will place them into
your TV's memory.
4. Press MENU until the MI'.'NUscreen disappears.
Chapter 1 11