Add Or Remove Channels From; Tv/Vcr's Memory; Auto Program - RCA T090802 User Manual

Startup
8. Add or remove channels from the TV/VCR's memory.
You may want to add or remove channels if some of them are not
active, have weak signals, or you do not want them in your channel
memory. A channel that has been removed can still be selected by
pressing number buttons on the remote.
A. Use the number buttons on the remote to select the channel you
want to add or erase from memory.
B. Press MENU on the remote to display the main menu, then use the
CHV orA button until Setup is highlighted. Press VOL+ to display
the Setup menu.
C. Press CHV until Add/Erase is highlighted.
D. To add or erase the desired channel, press VOL+ or - until the
display reads Added or Erased.
E. Press MENU twice to remove the menu from the screen and return
to normal viewing.
To add a 3-digit channel, such as channel 104, press the +100 button on
the remote, followed by the next two digits, in this case "0" and "4".
Setup
Air/Cable Antenna |
Auto Program /
Add/Erase Added
I Sleep Off
kan ua e En lishiiiiiiil _
• Setup
Air/Cable Antenna |
Auto Program
Add/Erase Erased ::::::
Sleep Off
Language ..............
_:Adjustl I
Bib:Move I;::::
Note: The 100+ button on the remote works only when
the TV/VCR is in cable mode. in antenna mode, the
highest channel that can be tuned is channel 69.
5