RCA T13070 User Manual page 24

Cmmed S died Amemm, aad na, or Cable System
W'_ a Cable Box
A. Supplied Antenna
Follow these steps to connect the supplied
antenna to your TV/VCR. Do not connect
this antenna if you plan to connect a
different type of indoor or outdoor antenna
or cable system.
1. Insert the antenna base into the slot on
the back of your TV/VCR.
2.
3,
Connect the twin-lead ends of the
antenna to the screw terminals of the
supplied antenna adapter.
Connect the antenna adapter to the
VHF/UHF connector on the back of the
TV/VCR.
41
5,
Plug in the TV/VCR's power cord.
"rum to page 2 for "Setting Up the
TV/VCR."
Adjust the length and position of the antenna
rods for the best reception.
• For viewing VHF channels, extend the rods
fully.
o
• ForUHF viewing, shorten the rods.
D
Antenna Slot
Antenna Adapter _;'J'
(supplied)
\
\
ANTENNA _
AUDIO VIDEO
Twin-Lead Ends
Back of TV/VCR
El
Antenna or Cable System
Without a Cable Box
1. Connect as shown.
This connection may require additional
accessories not provided.
2. Plug in TV/VCR's power cord.
3. Turn to page 2 for "Setting Up the
TV/VCR."
1
Match Your Type of Antenna or Cable
Back of TV/VCR
22