GE 35GT695FM1 User Manual page 31

Reference
Trouble Checks
Trouble
Checks and Adjustments.
. . . . " o
Remote
-Remote lockup
Buttons don't work when you
press them
Remove batteries and holci:down one or more buttons for several seconds
to drain the microprocessor inside the remote and reset it. Re-install the
batteries and try remote again.
e
Press TV to set the remote to control the TV_ See buttons on page 6-7.
Works part or none of the
time
Clear the path between the remOte and TV of any objects.
Aim the remote at the component you are trying to control.
Press "IVsoremote will control TV.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly., See batteries, page 2.
Can't select certain
channel
Sound
Noisy stereo reception
Picture okay, no sound
Press number buttons. Channel may not be in memory. See Autoprogram
on page 20.
Make sure TV!VCR switch on vcR is in the TVposition.
For numbers over 100, pressand hold I until 1- appears, then press the
other two numbers.
Set Cable/Air feature tO Cablefor channels higherthan 69. See page 25.
Turn Stereo off. The stereo broadcast may not be clear. See page 18.
Press VOLUME + or MUTE to restore sound.
Make sure TV speakers are on. Details are on page 19.
Picture okay, sound poor
No stereo on stereo station
TV Turns on or off
Turns off by itself
Turns on by itself
• Does not turn off at
Alarm Time
Try another channel,
Try adjusting the Tone. See page !8.
Change Stereo to off. The stereo broadcast may not be clear. See page 18.
Make sure Stereo is turned on. See page 18.
Check Sleep Timer. See sleep timer on page 22.
Wait 30 seconds and turn on again, a power surge may have occurred.
Check Alarmoff time. See alarm clock on page 23.
Che_ Alarm On Time. Se_ alarm clock on page 23.
• -o.. _ . . _ .
Make sure alarm is turned on or off. See alarm clock on page 23.
Check clock time. See clock on page 3.
29