Using The Who-Input Button - RCA P52935 User Manual

_ClLEAR Removes any menu ordisplay from the screen and returns you
to TV viewing. Will also exil: the Guide system_ ....
(0-9) Number Buttons Enters channel numbers and time settings
direct_ though the remote control. To enter a;two-digit, channel, press
the tw0 digits. To enter a three-digit channel; press and hold the first
digit until #- appears, then add the secondtwo. Example: to tune to
channel 123, press and hold 1 until 1-appears then press 2 and 3.
Wl_O.INPUT in Tv mode, press to toggle through theavailable input
_-soq_ces (VlD1/SVID1, VID2/SVlD2, previous Charlne!). In SAT mode, press
to select a_ailable channel lists. _ .
• AN1-P.NNA Functions as TVNCR button in VCR mode and TV/receiver
button in SAToCABLE mode'.
RERRSE, RLA.Y; FORWARD, RECORD, _-IroP, PAUSE If programmed,
provides transport control for some remote-controllable VCRs, DVD
players, laserdisc p!ayers, tape decks, and CD players. Pressing RECORD
when using the GUIDE Plus+ system sets theVCR to record a program.
•PIP Brings up the small picture-in-picture window. Pressagain to'
remove the PIPwindow. When PIP Caption Display - Alternate with PIP -
has been Selected, will display captioning in the PIP window.
SWAP Swapsthe main picturewith the PIP window.
CH (_PRL Selects the picture window, (that is, the main Or PIPwindow)
tobe changed by the CH ^ (channel up) or CH v (channel down) buttons.
RESET: Resets:picture qualityc_ontrois to the Bright Ughting Picture "
Control Preset. Point and select to choose a different Picture Control
Preset,
USING THE WHO.INPUT BUTTON
Use the WHO.iNPUT button to scroll through the availableinPut channels
and view components you have connected to the TV.
1_ Pres_TV to place tJ_e remote in TV mode. Make sure that the
component you want to view is turned ON.
L
2. PressWHO-INPUT to tune to an available input Channel.
3. Continueto press the WHO.INPUT button to scrollthrough the
channels..
Modes of Operation.
Because this universal remote can control
several different components (DVD:
player, VCR, _Cabl_Box, etc.) it uses , ..
•operational modes triggered by the "
component butt0nr_ For example if you :-
want the remototo control the W, you
_.. w ouM press'the WbuttxD.d to pt,_l:_e", ..:,_- -
:_remtoi.to wo.xie befomyou_u!d r :
21