ProScan PS80690 User Manual page 28

Using the Remote to Control a Component
Once the remote has been programmed with the correct codes, you're
ready to use it to control your component.
To operate the component using the remote:
1. Press the component button (TV, VCR, VCR2oLD, DSS.CABLE,
AUDIO, etc.) to set the remote to control that component.
2. Press POWER to turn the device off or on.
3. Use the remote buttons that apply to that device (CHAN buttons,
transport keys, etc.).
i
p_
Tip for the Simple Remote
To change channels on theVCR, press
and hold VCR, then press TV. Release
both and use the CHAN buttons to
change channels.To return to using
the simple remote buttons as
transport keys, press VCR.
3O
For PROSCAN, RCA, and GE
devices, pressing the device button
will usually turn the device on. Use
the POWER button to turn the
device off.