Advertisement
Onlythe
buttons that are used to control the TV are
described here. The rest of the buttons are used to
operate VCRs (pages 39-_),
cable-TV boxes
(page 35), and audio equipment (page 44).
@
®
®
@
@
@
@
@
ANT
PROG
CLEAR DISPLAY
OOQ
PLAY
PAUSE
STOP
GD
REWIND
FF
RECORD
(._D
(m,') (_E)
ZOOM OUT
$RS_)
®
®
®
®
®
®
®
TV Button
• Turnson 'IV andputsremote in "TVMode"so thatthe other
remotebuttonswill control theTV.
• Displays time (if clock has been set) and channelnumberon the
"IVscreen.
Important Note: Some buttonson the remotecontrol will not
controlthe TV unless the remote is in the "TV Mode". If another
component button(such as VCR2) is pressed,the remotewill go into
the "VCR Mode" and will controla compatible VCR. Toget back
into the "TV Mode",simply press the buttonlabeled TV. The
remote will go backinto the "TV Mode"andwill controlthe TV
again.
CHANNEL
Buttons
• Press CHANNEL up to select the next higher channel in channel
memory.
• Press CHANNEL down to select the next lower channel in channel
memory.
• You can add or erase channels in memory as desired. Details are
on page 24.
10
VOLUME
Buttons
• Press VOLUME up to increase volume.
• Press VOLUME down to decrease volume.
MUTE
Button
• Press MUTE to quickly reduce sound to minimum
level without
affecting
the picture
This is especially
useful during telephone
calls or other interruptions.
• When the sound is muted, the word MUTE
will be displayed
on
the screen
• To restore sound, press MUTE again or press VOLUME
up
PC (Previous Channel) Button
• Pressingthe PC buttoncauses the TV,to changebackto the last
tuned channel. This is useful shouldyou want to monitortwo
channels.
• To operate,select the fwst channel you wish to watch. Then select
the otherchannel by pressingtwo numberbuttons(for example,
press0 then 6 for channel 6). The "IVwill now change backand
forthbetween the two channelseachtime you press thePC
button.
Advertisement
