First Things First; Powering Up; Speaker Hookup - RCA RP-7987 User Manual

Before you start, you to need to know a couple of things.
POWERING UP
This portable stereo operates on battery or AC power.
BATTERY POWER
insert 8 D-sized alkaline batteries into the battery
compartment as shown the back of the main unit,
and you can take your stereo just about anywhere.
AC POWER
Plug the power supply cord into the AC power jack on the
back of the unit and into an AC power outlet that accepts the
polarized plug (one blade Wider than the other).
a_..-d.
RemoteControl
RP-7988ONlY
AC power supplycord
SPEAKER HOOKUP
To speaker terminals on main cabinet back:
1. Press down on the tab to open" the red terminal and insert
the red wire (+) into the terminal.
2. Press down on the tab to open the black terminal and
insert the black wire (-) into the terminal.
3. Ensure left speaker wires are connected to left speaker
terminal and right speaker wires are connected to right
speaker terminal.
DETACHING THE SPEAKERS FROM MAIN UNIT
1. Disconnect the speaker wires from the main cabinet
terminals.
2. Press on the tab securing the speaker to the base unit and
then slide the speaker up until it comes off of the unit.
3. Reattach the speaker wires to main cabinet speaker
terminal as described in "Speaker Hookup."
ATTACHING SPEAKERS TO TH E MAIN CABINET
1. Slide the speaker down the side rail on cabinet side.
2. Speaker release tab locks in place.
RIGHT SPEAKER LEFT SPEAKER
4" -- -- 4"
Black
wines
WARNING:
Be sure to follow the speaker hookup
instructions carefully; the system can
be damaged if speakers are
improperly connected.
J
2