RCA SCENIUM L37WD14 User Manual page 28

.
Press tile right arrow button to select tile choice that matches tile
way you have the device connected to this T\/.
You can select from tile fol]owing inputs or channels:
N/A Choose this if you don't have this particular device connected
to the TV, or if you don't want tile TV to automatica]]y tune to tile
correct channel/input when you're using this device.
Channel3 or 4 Device is connected to tile AN%CABLE jack
on tile back of tile T\/, and you want tile TV to tune to channel
3 when you press tile corresponding button on tile remote.
Reminder: make sure tile device's Channel 3/4 switch is set to
channel 3.
VID1 or VID2 (Video l, lput) Device is connected to tile
VII)EOI jack on tile back of the T\.' or tile VIDEO2 jack on tile
side of tile TV' and you want the T\.' to tune to tile VII)EO input
channel when you press the corresponding device button.
CMP1 or CMP2 (Component Video Input) Coinpatib]e
COlnponent video source, such as an HI)T\/ tuner or satel]ite
receiver, is connected to the three COMPONENT VIDEO INPITT
jacks (Y Pb Pr) on tile back of tile TV and you \\-ant the TV to tune
to tile component video input channel (CMPI or CMP2) when you
press tile corresponding device button.
VGA Device is connected to tile VGA jack on the back of tile T\.'
and you want tile T\," to tune to tile VGA input channel when you
press tile corresponding device button
HDMI1 orHDM12 Device is connected to tile HDMIIiI)VI or
HDMI2 jack on the back of tile TV and you want the TV to tune to
tile HI)MI input channel when you press tile corresponding device
button.
Chapter 3
1668591Bindb 28 4_ 6/5/06 3:28:17PM