Table of Contents
Advertisement
References
Trouble Checks
You may have problems
that can be fixed with a few minor adjustments.
Look for the type of problem youare
having below and then try the
suggestions
to get your TV going again. For warranty information see page 19.
Trouble
Checks
and Adjustments
Power
TV will not turn on
No picture, no sound but
TV has power
Plug TV in.
Plug something
else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Aim the remote at the TV and press POWER.
Make sure batteries are placed in the remote the right way. See batteries
on page 2.
Unplug TV for a few minutes and then turn it on again.
Check antenna
connections.
Check position of Cable/Air
feature. See page 1_.
Try another
channel.
Inactive channel may be tuned.
Make sure TV is tuned to the same channel asthe
switch on back of VCR
if watching a VCR.
Make sure TV/VCR button on VCR is in correct position when using VCR.
Picture
Blank •screen or Unusable
Signal appears onscreen
Picture poor, sound okay
Sound
Noisy stereo reception
Picture okay, no sound
• Picture okay, sound poor
No stereo on stereo station
Try another channel.
_active
channel may be tuned.
Scan the channels.
Check antenna
connections.
Adjust TV pic_re.
See pages 7-8.
Turn Stereo off. The stereo broadcast may not be clear. See page 9.
i
Press VOLUME + or MUTE to restore sound.
Try another
channel.
Try adjusting
the Stereo or Tone. See page 9.
Change Stereo to off. The stereo broadcast may not be dear. See page 9.
V[ake sure Stereo is turned on. See page 9....
r
17
Advertisement
Table of Contents
