Remote Control Instructions; Inserting Batteries In The Remote; Remote Control Reception Angle - RCA LED42A55R120Q User Manual

Inserting Batteries in the Remote
Remove the cover of battery cabin on the back of the remote control by lifting the cover
Insert two AAA batteries, making sure the polarities (+ and -) are aligned correctly
Place the cover back
If the remote control does not work, check these points:
• Are the polarities (+, -) correct?
• Are the batteries worn out?
• Is there an AC power failure?
• Is the power cord plugged in?
• Is there any interference or block near the remote
control sensor?
CAUTION:
• Used batteries should be recycled
• Keep out of children's reach
• DO NOT use new and old batteries together
• Change both the batteries at the same time
• When not using the remote control for a long time,
remove the batteries from the unit
Remote Control Reception Angle
Use your remote control within the distance and angle range shown below
L
7meters
\
i
I
........ _.......................................................... 2:::: _--J ..........
j "_
Universal Remote Control Code List
For Universal Remote Control brands listed below, please
use accompanying codes and refer to your Universal
Remote Control User Manual for basic Instruction
for changing TV code to operate the TV model
• Codes for DIRECTV: 0178, 10178
• Codes for Time Warner Cable: 0178, 10178
• Codes for Cox Communications: 0178
• Codes for Comcast: 10178
• Codes for Dish Network: 627
• Codes for Fios Verizon: 0205, 0057, 0493, 0775
English- 17