Table of Contents
Advertisement
When using the TV set
Do not bring your hands, face or objects close to the ventilation
holes of the TV set. Top of the TV set is usually very hot
due to the high temperature
of exhaust air being released through the Ventilation
holes. Burns or personal injuries can
happen if any body parts are brought too close. Placing any object near the top of the TV could also result in heat damage
to the object as well as to the TV if its ventilation
holes are blocked.
Be sure to disconnect
all cables before moving the TV set. Moving the TV with its cables attached might damage the
cables which, in turn, can cause fire or electric shock.
Disconnect
the power plug from the wall outlet as a safety precaution
before carrying
out any cleaning, electric
shocks can result if this is not done.
Clean the power cable regularly to prevent it from becoming
dusty. Built-up dust on the power cord plug can increase
humidity which might damage the insulation
and cause fire. Unplug the cord from the wall outlet and clean it with a dry
cloth.
This TV set radiates infrared rays; therefore,
it may affect other infrared communication
equipment.
Install your infrared
sensor in a place away from direct or reflected light from your TV set.
Selecting a location for the TV
1
Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.
2
Place the TV far enough from the walls to allow proper ventilation.
Inadequate ventilation
may cause overheating,
which may damage the TV.
Note: Please contact local dealer for wall mounting.
Optional External Equipment
For best performance,
video cables should utilize 75 ohm coaxial shielded wire. Cables are available
from your dealer or
electronic
supply store.
Before you purchase
any cables, be sure you know what type of output and input connectors
your various
components
require. Also determine
the length of cable you will need.
Advertisement
Table of Contents
