ProForm 730CS User Manual page 17

HOW TO USE PROGRAMS DIRECTLY FROM [] Follow the desired links on our intemat site to
select a program.
OUR INTERNET srrE
Our new internet site at www.iFit.com allows you to
access a large selection of programs that interactively
control your treadmill to help you achieve your specific
exercise goals. In addition, you can play iFit.com audio
and video programs directly from the internet. By
adding an optional upgrade module to the console, you
can use virtually endless features on our internet site.
Explore www.iFit.com for details. To purchase an up-
grade module, call toll-free f-800-735-0768.
To use programs from our internet site, the treadmill
must be connected to your home computer. See HOW
TO CONNECT YOUR COMPUTER on page 14. In ad-
dition, you must have at least a 56K modem and an
account with an internet service provider. A list of addi-
tional system and software requirements will be found
on our internet site.
Next, make sure that the I
on/off switch near the
power cord is in the on po- On
Position
sition. In addition, make
sure that the power cord is
pmpedy plugged in (see
HOW TO PLUG IN THE POWER CORD on page 8).
Follow the steps below to use a program from our
intemet site.
D Insert the key fully into the console.
When the key is _i!"_')' _1
inserted, the four dis- "__
plays and various indi- , ,o
cators on the console _ I
will light.
B Press the PROGRAM button.
When the key is in-
serted, the manual
mode will be selected.
To use a program from
our internet site, press
the PROGRAM button.
The iFit.com indicator
will light.
_lGo to your computer and start an internnt
connection.
B Start your web browser, If necessary, and go to
our internet site at www.iFIt.com.
Read and follow the on-line instructionsfor using a
program.
r_ Follow the on-line instructions to start the
program.
When you start the program, an on-screen count-
down will begin.
D Return to the treadmill and stand on the foot
rails. Find the clip attached to the key and slide
the key onto the waistband of your clothing.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking.
During the program, an electronic"chirping" sound
will alert you when the speed and/or inclineof the
treadmill is about to change. CAUTION: Always
listen for the "chirp" end be prepared for speed
and/or Incline changes.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the SPEED or INCLINE buttons
on the console. However, when the next "chirp"
is heard, the speed and/or Incline will change
to the next settings of the program.
To stop the program at any time, press the STOP
button on the console. The TIME/INCLINE display
will begin to flash. To restart the program, press
the START button. After a moment, the walking
belt will begin to move at 1.0 mph. When the next
"chirp" Is heard, the speed and Incline will
change to the next settings of the program.
When the programis completed, the walking belt
will stop and the TIME/INCLINE display will begin
to flash. Note: To use another program, press the
STOP button and go to step 5 above.
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard, make
sure that the IRt.com indicator is lit and that
the TIMEANCUNE display is not flashing. In ad-
dition, make sure that the audio cable is prop-
erly connected, that it is fully plugged In, and
that It Is not wrapped around a power cord.
17