Connectingyourvcr; Jacks And Cables - RCA VR691HF User Manual

CONNECTING YOUR VCR
Refer to these pages to help you connect your VCR.
JACKS AND CABLES
RF Jacks and Coaxial Cables (F-type)
The RF jacks provide good picture and mono sound quality, and
must be used if audio/video connections are not available for
your TV.
These jacks are required for antenna or cable-TV connections.
The RF jacks on the VCR are labeled IN FROM ANT. and OUT TO
TV. The coaxial cable supplied with your VCR is used to connect
the VCR's OUT TO TV jack and your TV's antenna input.
0
RFJack
Audio/Video Jacks and Cables (RCA-type)
The audio/video jacks provide very good picture and sound
quality, and can be used if your TV has audio/video input jacks.
These jacks are used for most audio/video connections between
components. The VCR audio/video jacks are color coded (yellow
for video, red for right audio, and white for left audio). If your
TV only has one input for audio (mono), you may need a
Y-adapter to hear sound from both channels.
Audiofideo Jack