Table of Contents
Advertisement
EDIT Signals two properly connected
compatible
VCRs to begin
copying a tape.
F.ADV (Frame Advance)
Advances the tape one frame at a
time during play-pause.
FWD Fast forwards
the tape when the VCR is stopped. Searches
forward
through
a tape during playback. Starts slow motion
during play-pause and increases slow-motion
speed.
GO BACK
Switches between two channels. Select one channel
and then select another
using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line inputs and the VCR's tuner. Line
input refers to the signal coming from the component
connected
to the audio/video
input jacks on the back or front of the VCR.
MENU.PROG
Displays VCR MAIN MENU on the TV screen.
Numbers
(0 through
9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 - - appears on the screen. Then press the other
two numbers.
PAUSE Pauses playback or recording.
Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
PWR Turns the VCR off.
REC Starts VCR recording.
Also used for express recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward
through
a tape during playback. Starts slow motion
during play-pause and decreases slow-motion
speed.
SEARCH Displays MOVIE,,ADVANCE
screen for prerecorded
movies or displays Index, Zero, and Blank Search menus on TV
screen. Starts COMMERCIAL,
,ADVANCE
skipping during
playback.
SLOW + and - Used for slow-motion
playback. Press + to
increase the speed or - to decrease the speed.
SPEED Selects a recording
speed (SP or SLP).
STOP Stops the current VCR function
such as record, playback,
rewind, or fast forward.
27
Advertisement
Table of Contents
