Table of Contents
Advertisement
Connections
to
other equipment
The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend-
ent on the model and features of each component. Check the Owner's Manual provided with each component
for the location of video and audio inputs and outputs.
Using an Audio Amplifier
Back of TV/DVD
Audio (L) Output
i_1i_1
Audio (R) Output
Y
Amplifier , ,
OOO
O
OOO
ToAudio (R) Input _
ToAudio (L) Input
/
AUDIO cord (not supplied)
Using
an AV Amplifier
with
built-in
digital
surround
If you are using an Amplifier with a built-in digital surround as shown below, you can enjoy the various audio
systems including Dolby Digital Surround audio that sounds just like the movie.
Connect
an AV amplifier
with built-in
Dolby Digital decoder,
DTS decoder,
MPEG decoder as shown
below.
Back of TV/DVD
o££, g£1
Ooaxial d igitalcable(notsupplied)
To Coaxial Digital Audio Input
decoder as listed above
TV/DVD
Front ---_
/
Speaker [ "
/ \
t\
(Left) \
Front
Speaker
Subwoofer
(Right)
Center Speaker
_
Surround
_
Surround
Speaker (Left)
Speaker
(Right)
* Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
NOTES:
. When you make the connection above, on the AV Amplifier, do not set DOLBY DIGITAL to DOLBY DIGITAL, or
MPEG to MPEG "ON". If you do, a loud noise will emit from the speakers possibly causing damage to your
hearing or to the speakers.
. Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
41
Advertisement
Table of Contents
