Connections To Other Equipment - RCA 9V400TD User Manual

The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend-
ent on the model and features of each component. Check the Owner's Manual provided with each component
for the location of video and audio inputs and outputs.
Using an Audio Amplifier
Back of TV/DVD
Audio (L) Output
Audio (R) Output
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as shown below, you can enjoy the various audio
systems including Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder as shown
below.
Back of TV/DVD
Coaxial digital cable (not supplied)
To Coaxial Digital Audio Input
AV Amplifier with built-in digital surround
decoder as listed above
*
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
*
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
NOTES:
When you make the connection above, on the AV Amplifier, do not set DOLBY DIGITAL to DOLBY DIGITAL, or
•
MPEG to MPEG "ON". If you do, a loud noise will emit from the speakers possibly causing damage to your
hearing or to the speakers.
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
•

Connections to other equipment

AUDIO cord (not supplied)
Speaker
Coaxial Digital
Audio Output
Amplifier
To Audio (R) Input
Front
(Left)
Surround
Speaker (Left)
To Audio (L) Input
TV/DVD Subwoofer
Center Speaker
Surround
Speaker
(Right)
Front
Speaker
(Right)
41