RCA P60752 User Manual page 13

Thechannel guide feature letsyou
display astillpicture ofseveral
channels atthesame t imesoyoucan
quickly review what p rograms are
available.
Note: Channels 2-13 were programmed
into the channel memory at the factory.
"]Yaese are the Channels that will appear
during channel
guide
unless you
autoprogram
the channel memory or add
aaaderase channels as described on
page 24.
o o L.,,'
'0
'0 '0
'0 '0 _0
3,00-,5-,
• • v
-Starting Channel Guide
(with
remote only)
To start channel guide, press the
CH GUIDE button.
Note: The remote control must be in the
"TV Mode". Pressing the TV button puts it
in the "TV Mode".
• The screen will display all the
channels that are programmed into
channel memory, 12 at a time.
Each little screen will display a stop-
action picture that will be
continuously updated.
• While the 12 channels are on the
screen, you can use the ZMOUT
button to enlarge the picture and then
use the arrow buttons to move around
the screen. To return to normal size,
press ZM OUT
Note: When using the zoom feature, you
will see a mosaic pattern as the picture is
made larger.
• To select one of the channels being
displayed in the channel guide, press
the two corresponding number
buttons for that channel:
-Stopping Channel Guide
• To select one of the channels being
displayed in the channel guide, press
the two corresponding number
buttons for that channel. That will
stop channel guide and take you
directly to the channel you selected.
• Another way to stop channel guide
is to press CH GUIDE. The little
screens will disappear, and th¢ TV
will return to the original channel
you were watching.
11